Skip to content

How it works

Send the plans. Get the list you’ll take to the trade.

New residential builds, Australia-wide. One measure, checked, yours to keep — so a quote is a rate against your quantities, not a private count you can’t see.

The steps

The measure is yours before anyone prices it.

You upload once. We measure and check. You take the take-off to your own trades — or, if you want, we ask trades to price that same list. New home builds anywhere in Australia, not commercial jobs or renovations.

A printed floor plan on a desk, with rooms marked in highlighter, a steel rule and a pen across the sheet, and a laptop at the edge.
  1. 01

    Send your plans

    You upload one set of drawings, tell us the project type, and nominate the trades you need measured.

  2. 02

    We measure and check

    Our engine reads the drawings; a local estimator reviews the work and runs the checks. If a check fails, we don’t ship it.

  3. 03

    Get your numbers

    A trade-by-trade bill of quantities, each line sourced to the drawing — the sheet you can open when a quote doesn’t look right.

  4. 04

    Get real quotes against themOptional

    The same measurements go to vetted trades. A higher quote is a higher rate — you choose, and the quantities were not written by the trade.

Optional: Ask trades to price the list you can point at.

See how a number gets made → >

Step 2 is where the engine and a local estimator do the work — see the method.

What to send

Send enough drawing that the measure can be checked.

The more complete the set, the firmer the number you can stand behind.

A squared-up vertical stack of large architectural sheets on a desk beside a rolled set standing in a black document tube.
  • Drawings — PDF is best. Architectural and structural sheets, with a scale bar or stated scale.
  • A specification — if you have one. It lets us measure the finishing trades more firmly.
  • Size — upload up to 1GB, or paste a secure link if your set is larger.

Drawings not complete? We’ll email you what’s missing before the clock starts.

Turnaround

24–48 hours — counted from when the drawings are actually usable.

The clock starts when we email that your drawings are usable — not on upload or payment. If something’s missing, we pause until it arrives, then restart from that confirmation.

  1. Upload

    You send one set of drawings.

  2. “Plans are usable” email

    We confirm your drawings are readable and complete enough to measure — the clock starts here.

  3. +24–48 hours

    Your trade-by-trade take-off is delivered.

Upload → “plans are usable” email (clock starts) → +24–48h.

What you get back

A take-off you can read out loud in the room.

A trade-by-trade bill of quantities (PDF plus Excel/CSV). Each line shows its source page, dimension and confidence; inclusions, exclusions and an accuracy class are stated up front. Hand a trade their section. If their quantity differs, you both have the same page to look at. Fixed fee, delivered complete — yours to keep.

The same file is meant to leave your desk: attach the PDF or Excel to a subcontract, drop trade sections into a tender, or include the take-off in the pack you give a bank or valuer when you’re lining up construction finance. Every line traces to a drawing page — so in front of a client or a lender you’re pointing at a measured list, not a number you improvised in a spreadsheet.

Fixed fee, delivered complete, yours to keep.

Open the sheet before you send plans → >

Bill of Quantities — excerpt SL-SAMPLE-010 · 3 townhouse lots · Adelaide SA · Redacted sample
Accuracy class 2 v1.3

Accuracy class covers quantity, not cost. Quantities carry a confidence figure; the benchmark range is indicative and carries no accuracy promise.

Code Item Qty Unit Source Conf.
FOOT-Lot1-01 Concrete to slab and footings (N25) 21.88 m³ SL-SAMPLE-010 p.S02 · slab setout 0.97
FOOT-Lot1-03 Formwork — contact area 16.78 m² SL-SAMPLE-010 p.S02 · footing plan 0.95
CLAD-Lot1-01 Hebel PowerPanel — installed net wall area 112.4 m² SL-SAMPLE-010 p.A05 · elev. E1–E4 0.96
CLAD-Lot1-04 Control joints — backing rod & sealant 21.0 m SL-SAMPLE-010 p.A05 · elev. E1–E4 0.94
FRAM-Lot1-01 External wall frame — 90mm MGP10 96.4 m SL-SAMPLE-010 p.A03 · floor plan GF 0.94
ROOF-Lot1-01 Fink trusses @ pitch 22.5° 28 ea SL-SAMPLE-010 p.A06 · roof plan 0.93

Swipe to see source & confidence →

Source = drawing page + dimension read Conf. = engine confidence, flagged for human check below 0.90

Know the measure before the next trade does.

Test us on a home you’ve already built. Drawings only — your costs stay with you.