Skip to content

Trade takeoff

How to take off a Hebel external wall from plans

A practical guide to measuring Hebel PowerPanel external cladding from residential drawings — net wall areas, openings, corners and jointing — and the mistakes that blow the quantity out.

Insights Published · 7 min · By Scaleline

For Australian builders of new homes.

A hi-vis worker on scaffolding fixing grey fibre-cement cladding panels to the external wall of a timber-framed house under a clear sky.

To take off a Hebel PowerPanel external wall, measure the net wall area — gross elevations less openings — then account for corners, jointing and panel coverage. The quantity blows out most often when openings aren’t deducted properly or corner wastage is ignored. Here’s how to do it line by line.

Start from net wall area, not gross

The headline number is external wall area. Read it off the elevations (E1–E4), not the floor plan — elevations give you true heights including any raised floor and parapet.

  1. Gross wall area per elevation = length × height, measured to the real top of cladding.
  2. Deduct openings — windows and doors — at their structural opening size. Don’t deduct trivial penetrations; do deduct anything over roughly 1m².
  3. The result is net cladding area. This is what you price panels against.

Reading openings off the schedule rather than scaling the drawing is the single biggest accuracy win here.

Don’t forget what isn’t “area”

Area is only half the job. Hebel is priced and installed with linear and count items that a quick takeoff skips:

  • Corner stop-ends and external corners — linear metres, off the plan’s corner count × wall height.
  • Control and jointing — linear metres of jointed junctions.
  • Base flashings and head details — per the detail sheets.

Miss these and your quantity looks lean until the invoices land.

Where the quantity blows out

  • Scaling instead of reading dimensions. The drawing’s own figures beat anything measured off a PDF at the wrong scale.
  • Gross vs net confusion on openings — double-counting or forgetting to deduct.
  • Ignoring wall height variation across a split-level or raised portico.

How we measure it

Our engine reads the vector and text layers of the elevations first — the dimensions the drafter put there — and uses vision only to resolve what the annotations don’t pin down. Every Hebel line in the report carries its source: the elevation it came from and the confidence. Anything below 0.90 gets a human check before the report ships. You can see a worked Hebel line in our sample report.

Measuring Hebel on a live job? Send us the plans →

This is Scaleline’s view. We measure residential jobs from drawings — we don’t price them, and we don’t sell software. Where we mention how we work, it’s to be useful, not to oversell.

See it on your own job

This is a trade we measure deep. Test us on a job you’ve already built and see for yourself.