Blog
Trade quotes for builders: prices you can compare
Trade quotes for builders only compare when every subcontractor prices the same quantities. How that works in Adelaide and South Australia.
Blog Published · By Scaleline
Notes for builders across Australia. The measuring service is new residential builds.
- trade quotes for builders
- comparable subcontractor quotes
- subcontractor quotes adelaide
- builder quote comparison south australia
- same quantities every trade
Trade quotes for builders are only useful when every subcontractor has priced the same quantities. If each trade measures the drawings themselves, the quotes come back describing different jobs, and the gap between them is mostly scope. Comparable subcontractor quotes start from one list: the same inclusions, the same exclusions, the same numbers. The rate is what you compare after that, not before.
This is the practical version of that idea. It covers what “the same quantities” actually means, how a builder quote comparison goes wrong, and how a small set of trade quotes can be collected without turning the job into an open contest. Examples below use Adelaide sites. The measuring service is new homes, Australia-wide.
The quote you cannot compare
You send the plans to three electricians. You ask for a price. What comes back is three PDFs, three totals, and very little you can subtract from anything else. One has included the light fittings. One has not. One has allowed the external lighting and assumed someone else digs the trench. None of them has done anything underhanded. Each of them measured a job, and the jobs were not the same job.
Builders know this pattern. It is why a low quote does not feel like a win until someone has read the exclusions, and why a high quote is often the one that bothered to include the awkward lines. The time disappears in the reading. You are not comparing rates. You are reconstructing three take-offs to see whether they were ever about the same house.
Subcontractor quotes in Adelaide are not special in this. A volume builder’s trade list and a custom builder’s trade list both run into it the moment the drawings leave the office as “please price”. The difference is how many times a week you are willing to do that reconstruction. If quoting is already the part of the week that does not get finished, adding more trades to the email does not make the comparison clearer. It makes more PDFs.
The fix is upstream of the price. Same quantities to every trade. We measure; we do not set the rate. The trades price that measured set, or you do. A longer version of the measuring problem is in why three quotes never match. The rest of this article is the quoting step that sits on top of it.
What comparable subcontractor quotes contain
Comparable subcontractor quotes have three properties you can check without trusting anyone’s total.
First, the scope brief is identical. The same trades, the same inclusions, the same exclusions, sent out as one written list. “Electrical” is not a scope. A list that says whether fittings are supplied, whether the meter upgrade is in, whether the trench for the external lights is in, and whether the temporary supply is in — that is a scope. If the list is the same document for every trade you approach, you can lay the replies on it.
Second, the quantities are identical where the work can be measured from the drawings. Cable and pipe are not always sensibly reduced to a single number the trade will adopt, and a good brief does not pretend they are. What can be shared is shared: the counts, the areas, the lengths that were read off the plans, each one traceable to the sheet it came from. Where the trade must still allow their own method — waste, fixings, the way they like to run a circuit — the brief says that the allowance is theirs, so you do not mistake their method for a different house.
Third, the reply is the trade’s own price, unchanged. A comparison that rewrites someone’s quote into a score has stopped being a comparison. You want the original, and you want a view that lines the originals up. Ranking, starring, or recommending a winner is a different product. It asks you to outsource the decision. Comparable quotes ask you to make the decision with the gaps already visible.
Same quantities, every trade. That phrase is the whole test. If you cannot point at one list and say “all three of these prices are for this”, you do not have a builder quote comparison yet. You have a pile of offers.
Where builder quote comparisons go wrong
They go wrong in a handful of repeating ways. Knowing the pattern is enough to spot it on the next set.
The plans are sent without a list. Each trade builds their own. The totals diverge, and the builder spends the evening finding the line that only one of them priced. This is the default, and it is the expensive one, because the time is yours.
The list exists, but it is different in each email. A sentence gets added for the trade who asked a question, and it never makes it back to the other two. From that moment the quotes are not comparable, even though it feels as if you were being helpful. Questions are good. The answer has to land on the shared list, and the other trades have to see it, or you are back to three jobs.
Allowances are left vague. “PC sum for fittings” with no amount, or with a different amount in each request, guarantees the totals cannot be read across. Put one figure on the allowance and use it in every request, or take the allowance out and ask for labour and installation only. Both are comparable. A mix is not.
Exclusions are treated as a footnote. They are the comparison. A trade who excludes rock, asbestos, or after-hours work has told you something the total cannot. Line the exclusions up beside the prices. A builder quote comparison that sorts by total and ignores exclusions will keep selecting the quote that left the most out.
Too many quotes are collected. Past a small number, you are not reading them. Three is enough to see an outlier and few enough that a builder will actually look. A long list of half-read prices feels like diligence and behaves like noise. You also owe the trades a straight answer. Asking thirty people to price a house, then going quiet, is how good subbies stop replying.
The last failure is mixing up who the price is for. A trade quote is their offer to do their package. It is not a retail price for the owner, and it is not a number for us to “sharpen”. If someone in the middle starts adjusting the trade’s figure, the original is what you have lost, and the original is the only thing you can hold the trade to.
Same quantities, every trade
Same quantities, every trade, is a discipline before it is a service. You can run it yourself. Take off the job once, or pay to have it taken off once, and send that take-off with the drawings. Tell each trade what they are allowed to change (their rate, their brand of fitting where the brief leaves it open) and what they are not (the counts you have already measured). Ask them to price the list, and to mark any line they refuse.
What comes back can then be read line by line. The lines that match are the rate comparison you wanted in the first place. The lines one trade has struck through are the conversation. The lines nobody has priced are the gap between packages — the trench the electrician thought the landscaper owned, the external tap the plumber thought was in the irrigation. Those gaps are the reason to do this before anyone is on site. Finding them in the quotes is cheap. Finding them in the programme is not.
This is also why measuring and pricing stay apart. The person who measured the job should not be the person whose rate depends on the measurement coming out a particular way. We measure residential work from the drawings and we do not set the trade’s price. The neutrality is the product. If the same desk measured the quantities and then competed to supply the trade, you would be right to wonder whose number you were looking at. The split is there so you do not have to wonder.
On a renovation the drawings are often thinner, so the shared list carries more of the load and the site will still surprise you. The same rule holds. Write the inclusions once, including the strip-out and the making good, and send that sentence to every trade. How that looks for bathrooms and kitchens is in comparing renovation quotes in Adelaide.
What we do when you want the quotes collected
Some builders want the list built and the calls made, because the week is already full. The trade-quote step is straightforward, and it is narrower than people expect.
You send one set of drawings. You say which packages you need priced, and where the job is. We agree a written inclusions and exclusions list for each trade before the plans go out. If the job has already been measured, the quotes are priced against that bill. If you are starting from drawings only, the scope brief is built first so the trades are still answering the same question.
Up to three vetted trades per package are approached. Not an open board, and not a crowd. If someone does not respond or declines, you hear that, rather than a quiet substitution. Licence, registration and insurance are checked before a partner is on the list. You can speak to the trades directly — a lot of packages need a site walk — and the quotes still come back against the brief.
You receive every quote that comes in, as it was written, with the original attached, set out so the lines can be read across. We do not mark the quotes up. We do not rank them, score them, or tell you which one to take. That call stays yours. The network is not a bidding theatre. Three prices you can read are the point; thirty prices you cannot read are someone else’s product.
Your drawings are used to obtain those quotes and nothing else. They are not shared with another company in the group, and the trades receive them under confidentiality. That is the rule, and it is written on the fairness page along with the rest: three rather than thirty, every quote passed on, partners vetted before they join.
The public description of the step is on trade quotes. The live service is new residential builds across Australia — builders outside their usual trade list, and owners or developers holding drawings for a new home. If your regular electrician is already pricing your work properly, you do not need a stranger in that package.
South Australia is not a generic “metro”
Subcontractor quotes in Adelaide pick up local conditions that a generic brief will miss, and a builder quote comparison in South Australia should not pretend otherwise. Soil and wind are not colour on a specification. They change footing and tie-down scope, which changes who has included what. A quote prepared as if every site were a calm suburban block will look tidy and be wrong on a reactive site or an exposed one. The measuring has to be done against the documents for that site, not against a typical detail.
Region matters in a more ordinary way too. A trade who will happily price a job in the inner suburbs may not price the same package two hours up the highway, or may price it with travel and accommodation the others have not allowed. That is a real difference and it belongs on the sheet as its own line, not as a suspicion that someone is “loading” the rate. Ask for it to be shown. A comparison that buries travel inside the labour rate is harder to read the next time the job is closer to home.
Programme is local as well. A builder who already knows their trades know their lead times. A builder pricing a patch they do not usually work in does not. The quote is not only a rate. It is whether the trade can start when the frame is ready. Collect that in the same request so you are not comparing a price that can start in three weeks with a price that can start in four months and calling them the same offer.
None of this is a reason to collect more quotes. It is a reason to make the three you collect answer the same, specific job: this site, this set of drawings, this list, this timing.
How to read the set when it arrives
Read exclusions first, then allowances, then the lines that only one trade has filled in. Those three passes catch almost every false gap. After that, the totals are allowed to matter.
Keep the originals. A neat comparison table is a view; the PDF the trade signed their name to is the offer. If the view and the original disagree, the original wins, and the view needs to be fixed. This is why the originals come with the comparison rather than being replaced by it.
Decide what you will do about the gaps before you award. If the trench is in nobody’s quote, it is still in the job. Awarding the electrical and hoping is how that trench becomes a variation against a trade who never owned it, or a weekend you did not plan to dig. Put the missing line to the trade who should have it, or to a separate package, while you still have the other prices in front of you.
Tell the trades who missed out. It is ordinary courtesy and it is how you still have three replies next time. A builder who only ever calls when they have already chosen, or who never calls back at all, trains the list to ignore the next email. Comparable subcontractor quotes depend on trades being willing to price a proper brief. That willingness is not automatic.
Then file the list with the job. The next variation, and the next similar house, is easier if the inclusions you fought to align are still written down. A comparison you cannot find six weeks later was a one-off favour to yourself. A comparison you can reopen is part of how the office prices the one after.
What this is not
It is not a promise that the three prices will be close. If they are close, the scopes matched and the market is in a narrow band. If they are not close, you can now see whether the cause is the rate or a line. Both outcomes are usable. A process that only looks successful when the numbers cluster has confused comfort with comparison.
It is not an auction. Trades are not shown each other’s prices and told to sharpen. That produces a race, and it produces exclusions scribbled back in to recover the margin. You get a lower total and a thinner scope, which is the problem you were trying to leave.
It is not a substitute for your own judgement of the trade. The quote does not know who turns up, who supervises apprentices, or who answers the phone when the meter is wrong. You know that, or you find it out by speaking to them. The quote’s job is narrower: to be a price for a scope you can point at.
And it is not measuring. Measuring is the fixed-fee work of reading the drawings and writing the quantities down, trade by trade, with the line sourced to the sheet. Pricing is what the trade does with that list. Keeping them apart is deliberate. The pricing page is the measuring fee. The method page is how deep each trade is measured. The sample report is what the quantities look like before anyone is asked for a rate.
A practical sequence
If you want trade quotes for builders to come back comparable, the sequence is short.
Agree the packages. Not every trade on the job needs three prices. Choose the ones where you do not already trust a single relationship, or where the scope is the thing that keeps going wrong.
Write one inclusions and exclusions list per package, or have it written from the drawings. Include the lines that usually fall between trades. State the allowances as one figure, used everywhere.
Send that list with the drawings to no more than three trades for that package. Ask them to price the list, to mark what they exclude, and to say when they could start.
Read exclusions and gaps before totals. Keep the originals. Decide the missing lines before you award. Tell everyone what you decided.
Then, if you want the quantities underneath the list to be one measured set rather than three private take-offs, do the measuring first and send the prices second. How it works is that order. Trade quotes is the second half, once there is a set of numbers for the trades to price against. One set of numbers. Every quote priced against it. The comparison is the part you should not have to rebuild by hand on a Thursday night.
This is Scaleline’s view. We measure residential jobs from drawings. We don’t set a trade’s rate, and we don’t rank, score or recommend the quotes that come back.